Basic Setup; Wireless Global Configuration; Figure 356: Wireless Global Configuration - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

Basic Setup

The WLAN > Administration > Basic Setup page contains several tabs that allow you to access Web pages to

configure global wireless settings for the DWS-4000 Series switch, device discovery settings, and default AP

profile settings. The Basic Setup page also provides a tab for access to pages to configure information in the

Valid AP Database on the switch. If AP MAC address validation is performed locally on the switch, and not by

a RADIUS server, the MAC address of the AP must be added to the Valid AP database to allow the switch to

manage the AP.

In order for the DWS-4000 Series switch to be able to discover and manage access points, the WLAN admin

mode on the switch must be enabled, and the WLAN Switch Operational Status must report that it is enabled.

However, before you enable the WLAN Switch field, set the correct country code for the switch so that the

access points can operate only in the modes permitted in your country. The default country code is US for

operation in the United States. To set the country code, enable the switch by using the Web interface, and

configure other global wireless settings on the switch, click WLAN > Basic Setup.

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents