D-Link DWL-8600AP User Manual page 208

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

GARP Leave Timer (centisecs) Displays time lapse, in centiseconds, that the switch waits before leaving its

GARP Leave All Timer

• If you make any changes to the page, click Submit to apply the changes to the system.

Table 100: GARP Port Configuration Fields (Cont.)

GARP state. Leave time is activated by a Leave All Time message sent/

received, and cancelled by the Join message received.This allows time for

another station to assert registration for the same attribute in order to

maintain uninterrupted service. Enter a number between 20 and 600 (0.2 to

6.0 seconds). Leave time must be greater than or equal to three times the join

time. The factory default is 60 centiseconds (0.6 seconds). An instance of this

timer exists for each GARP participant for each port.

Displays time lapse, in centiseconds, that all switches wait before leaving the

GARP state. The leave all time must be greater than the leave time. The

possible field value is 200-6000. The default value is 1000 centisecs. The Leave

All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll PDU

indicates that all registrations will shortly be deregistered. Participants will

need to rejoin in order to maintain registration. The Leave All Period Timer is

set to a random value in the range of LeaveAllTime to 1.5*LeaveAllTime. The

timer is specified in centiseconds. Enter a number between 200 and 6000 (2

to 60 seconds). The factory default is 1000 centiseconds (10 seconds). An

instance of this timer exists for each GARP participant for each port.

Configuring GARP

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents