Upload File From Switch (Tftp); Figure 88: Upload File From Switch; Table 76: Upload File From Switch Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
• Click the Start File Transfer button to initiate the file download.

Upload File From Switch (TFTP)

Use the Upload File from Switch page to upload configuration (ASCII) and image (binary) files from the switch
to the TFTP server.
To display the Upload File from Switch page, click Tool > Upload File in the navigation tree.
Field
File Type
Image
TFTP Server Address Type
TFTP Server Address
D-Link
Oct. 2015

Figure 88: Upload File from Switch

Table 76: Upload File from Switch Fields

Description
Specify what type of file you want to upload:
• CLI Banner: Retrieves the CLI banner file.
• Code: Retrieves a stored code image.
• Configuration: Retrieve the stored startup configuration (.cfg) and copy it
to a TFTP server.
• Text Configuration: Retrieves the text configuration file startup-config.
• Error Log: Retrieves the system error (persistent) log, sometimes referred
to as the event log.
• Buffered Log: Retrieves the system buffered (in-memory) log.
• Trap Log: Retrieves the system trap records.
Specify the code image to upload, either active or backup. This field is only
visible when Code is selected as the File Type. The factory default is active.
Specify either IPv4 or IPv6 address to indicate the format of the TFTP Server
Address field. The factory default is IPv4.
Enter the IP address of the TFTP server in accordance with the format
indicated by the TFTP Server Address Type. The factory default is the IPv4
address 0.0.0.0.
Upload File From Switch (TFTP)
Unified Wired and Wireless Access System
Page 175