Access Point Profile Qos Configuration; Figure 390: Qos Configuration - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

Configuring Advanced Settings

Access Point Profile QoS Configuration

Quality of Service (QoS) provides you with the ability to specify parameters on multiple queues for increased

throughput and better performance of differentiated wireless traffic like Voice-over-IP (VoIP), other types of

audio, video, and streaming media as well as traditional IP data over the D-Link Unified Switch.

To display the QoS Configuration page for an AP profile, click WLAN > Advanced Configuration > AP Profiles,

select the tab corresponding to the profile, and click the QoS tab. Click the radio button corresponding to the

radio interface you want to configure (QoS is configured per radio interface).

Configuring Quality of Service (QoS) on the D-Link Unified Switch consists of setting parameters on existing

queues for different types of wireless traffic, and effectively specifying minimum and maximum wait times

(through Contention Windows) for transmission. The settings described here apply to data transmission

behavior on the access point only, not to that of the client stations.

AP Enhanced Distributed Channel Access (EDCA) Parameters affect traffic flowing from the access point to the

client station. Station Enhanced Distributed Channel Access (EDCA) Parameters affect traffic flowing from the

client station to the access point.

You can specify custom QoS settings, or you can select a template that configures the AP profile with pre-

defined settings that are optimized for data traffic or voice traffic.

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents