D-Link UWS User Manual
Double VLAN Tunneling Summary
The Double VLAN Tunneling Summary page shows the double VLAN tunneling configuration status for all ports
on the system.
To access the Double VLAN Tunneling Summary page, click LAN > Monitoring > VLAN Summary > Double VLAN
Status in the navigation tree.
Field
Interface
Interface Mode
EtherType
• Click Refresh to display the most current information from the router.
D-Link
Oct. 2015
Figure 107: Double VLAN Tunneling Summary
Table 93: Double VLAN Tunneling Summary Fields
Description
Select the physical interface for which you want to display or configure data.
This specifies the administrative mode for Double VLAN Tagging:
• Enable: Double VLAN Tagging is enabled for the specified port (or All
ports).
• Disable: Double VLAN Tagging is disabled for the specified port (or All
ports), which is the default value.
The two-byte hex EtherType to be used as the first 16 bits of the Double VLAN
tag:
• 802.1Q Tag: Commonly used tag representing 0x8100
• vMAN Tag: Commonly used tag representing 0x88A8
• Custom Tag: Indicates that a custom tag has been configured and displays
its value.
Managing VLANs
Unified Wired and Wireless Access System
Page 197