Figure 296: Port Access Control Status - Mac-Based Control Mode; Table 251: Port Access Control Status Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

Figure 296: Port Access Control Status - MAC-based Control Mode

Protocol Version

PAE Capabilities

Control Mode

Selects the Unit and Port to view.

This field displays the protocol version associated with the selected port. The

only possible value is 1, corresponding to the first version of the 802.1x

specification. This field is not configurable.

This field displays the port access entity (PAE) functionality of the selected

port. Possible values are "Authenticator" or "Supplicant". This field is not

configurable.

Defines the port authorization state. The control mode is only set if the link

status of the port is link up. The possible field values are:

• Auto: Automatically detects the mode of the interface.

• Force Authorized: Places the interface into an authorized state without

being authenticated. The interface sends and receives normal traffic

without client port-based authentication.

• Force Unauthorized: Denies the selected interface system access by

moving the interface into unauthorized state. The switch cannot provide

authentication services to the client through the interface.

• MAC-based: Sets the mode of the interface to authentication on a per

supplicant basis.

Port Access Control

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents