Http Configuration; Figure 17: Http Configuration; Table 12: Http Configuration Fields - D-Link DWL-8600AP User Manual
Dws-4000 series access points
Hide thumbs
Also See for DWL-8600AP:
- Administrator's manual (135 pages) ,
- Reference manual (36 pages) ,
- Installation manual (12 pages)
Table of Contents
Advertisement
D-Link UWS User Manual
HTTP Configuration
Use the HTTP Configuration page to configure the HTTP server settings on the system.
To access the HTTP Configuration page, click LAN > Administration > HTTP Configuration in the navigation
menu.
Field
HTTP Admin Mode
Java Mode
HTTP Session Soft Timeout
HTTP Session Hard Timeout
Maximum Number of HTTP
Sessions
• If you make changes to the page, click Submit to apply the changes to the system.
D-Link
Oct. 2015
Figure 17: HTTP Configuration
Table 12: HTTP Configuration Fields
Description
This select field is used to Enable or Disable the Administrative Mode of HTTP.
The currently configured value is shown when the web page is displayed. The
default value is Enable. If you disable the HTTP admin mode, access to the web
interface is limited to secure HTTP, which is disabled by default.
This select field is used to Enable or Disable the web Java Mode. This applies
to both secure and un-secure HTTP connections. The currently configured
value is shown when the web page is displayed. The default value is Enable.
This field is used to set the inactivity timeout for HTTP sessions. The value
must be in the range of (0 to 60) minutes. A value of zero corresponds to an
infinite timeout. The default value is 5 minutes. The currently configured value
is shown when the web page is displayed.
This field is used to set the hard timeout for HTTP sessions. This timeout is
unaffected by the activity level of the session. The value must be in the range
of (0 to 168) hours. A value of zero corresponds to an infinite timeout. The
default value is 24 hours. The currently configured value is shown when the
web page is displayed.
This field is used to set the maximum allowable number of HTTP sessions. The
value must be in the range of (0 to 16). The default value is 16. The currently
configured value is shown when the web page is displayed.
HTTP Configuration
Unified Wired and Wireless Access System
Page 77
Hide quick links:
Advertisement
Table of Contents
