D-Link UWS User Manual
VRRP Route Tracking Configuration
Use VRRP Route Tracking Configuration to track specific route IP states within the router that can alter the
priority level of a virtual router for a VRRP group.
To display the page, click LAN > L3 Features > VRRP > Virtual Router Configuration in the navigation tree, then
click the Track Route button.
Field
Interface
Virtual Router ID
Tracking Route Pfx
Tracking Route PfxLen
Priority Decrement
Reachable
Remove
• Click Add to proceed to the VRRP Route Tracking page.
• Click Submit to send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a Save configuration is
performed.
• Click Refresh to refresh the page with the most current data from the switch.
• Click Cancel to return to the Virtual Router Configuration page.
D-Link
Oct. 2015
Figure 214: VRRP Route Tracking Configuration
Table 195: VRRP Route Tracking Configuration Fields
Description
The interface associated with the Virtual Router ID.
The Virtual Router ID for which tracking data is to be displayed.
The prefix of the tracked route.
The prefix length of the tracked route.
Enter the priority decrement for the tracked route. The valid range is 1-254.
The default value is 10.
The reachability of the tracked route.
Removes the selected tracking routes from the VRRP tracked list.
Virtual Router Redundancy Protocol (VRRP)
Unified Wired and Wireless Access System
Page 329