Global Configuration And Status; Figure 119: Igmp Snooping Global Configuration And Status; Table 103: Igmp Snooping Global Configuration And Status Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual

Global Configuration and Status

Use the IGMP Snooping Global Configuration and Status page to enable IGMP snooping on the switch and view
information about the current IGMP configuration.
To access the IGMP Snooping Configuration and Status page, click LAN > L2 Features> IGMP Snooping >
Configuration and Status in the navigation tree.

Table 103: IGMP Snooping Global Configuration and Status Fields

Field
Admin Mode
Multicast Control Frame
Count
Interfaces Enabled for IGMP
Snooping
Data Frames Forwarded by
the CPU
VLAN Ids Enabled For IGMP
Snooping
• Select Enable or Disable the Admin Mode field and click Submit to turn the feature on or off. Perform a
save if you want the changes to remain in effect over a power cycle.
D-Link
Oct. 2015

Figure 119: IGMP Snooping Global Configuration and Status

Description
Select the administrative mode for IGMP Snooping for the switch from the
pulldown menu. The default is disable.
Shows the number of multicast control frames that have been processed by
the CPU.
Lists the interfaces currently enabled for IGMP Snooping. To enable interfaces
for IGMP snooping, see
Shows the number of data frames forwarded by the CPU.
Displays VLAN Ids enabled for IGMP snooping. To enable VLANs for IGMP
snooping, see "Multicast Router Status" on page
"Interface Configuration" on page
Unified Wired and Wireless Access System
Configuring IGMP Snooping
215.
219.
Page 214