Time Zone Configuration; Figure 34: Time Zone Configuration; Table 29: Time Zone Configuration Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

Address Type

Server Stratum

Reference Clock Id

Unicast Sever Max

Unicast Server Current

Broadcast Count

• Click Refresh to display the latest information from the router.

Time Zone Configuration

Use the Time Zone Configuration page to configure the time zone difference from Coordinated Universal Time

To display the Time Zone Configuration page, click LAN > Administration > SNTP Time Zone Configuration

in the navigation menu.

Hours-offset

Minutes-offset

• If you change any of the settings on the page, click Submit to apply the changes to system.

Table 28: Global Status Fields (Cont.)

Specifies the address type of the SNTP Server address for the last received valid

Specifies the claimed stratum of the server for the last received valid packet.

Specifies the reference clock identifier of the server for the last received valid packet.

Specifies the mode of the server for the last received valid packet.

Specifies the maximum number of unicast server entries that can be configured on

this client.

Specifies the number of current valid unicast server entries configured for this client.

Specifies the number of unsolicited broadcast SNTP messages that have been

received and processed by the SNTP client since last reboot.

Set the hours difference from UTC. (Range: -12 to +13)

Set the minutes difference from UTC. (Range: 0–59

Set the acronym of the time zone. (Range: 0–4 characters)

Configuring SNTP Settings

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents