Initiating Manual Channel Plan Assignments; Figure 371: Manual Channel Plan; Table 339: Channel Plan History - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
Field
5 GHz (802.11a/n)
2.4 GHz (802.11b/g/n)
Operational Status
Last Iteration
Last Algorithm Time
AP MAC Address
Location
Radio
Iteration
Channel
Command Buttons
The page includes the following button:
• Refresh—Updates the page with the latest information.

Initiating Manual Channel Plan Assignments

If you specify Manual as the Channel Plan Mode on the Configuration tab, the Manual Channel Plan page
allows you to initiate the channel plan algorithm.
To manually run the channel plan adjustment feature, select the radio to update the channels on (5 GHz or 2.4
GHz) and click Start.
D-Link
Oct. 2015

Table 339: Channel Plan History

Description
The 5 GHz and 2.4 GHz radios use different channel plans, so the switch tracks the
channel history separately for each radio. The channel information that displays on
the page is only for the radio you select.
This field shows whether the switch is using the automatic channel adjustment
algorithm on the AP radios.
The number in this field indicates the most recent iteration of channel plan
adjustments. The APs that received a channel adjustment in previous iterations
cannot be assigned new channels in the next iteration to prevent the same APs from
being changed time after time.
On the AP Management > RF Management > Configuration tab, you can set the
history depth to control the maximum number of iterations stored and displayed in
the channel plan history.
Shows the date and time when the channel plan algorithm last ran.
Note: To set the system time on the switch, you must use SNTP, which is disabled by
default. From the Web interface, you configure the SNTP client and server
information from the pages in the LAN > Administration > System > SNTP folder.
From the CLI, use the
sntp
This table displays the channel assigned to an AP in an iteration of the channel plan.

Figure 371: Manual Channel Plan

commands in Global Config mode.
Unified Wired and Wireless Access System
AP Management
Page 580