D-Link DWL-8600AP User Manual page 529

D-Link UWS User Manual
Field
Channel Load
Measurement Status
Time Remaining
New Request Configuration
Client MAC Address
Channel
Duration
Command Buttons
The page includes the following buttons:
• Submit—Updates the switch with the values you enter. To retain the new values across a power cycle,
you must perform a save (Tool > Save Changes).
• Abort—Cancel the current measurement request.
• Refresh—Updates the page with the latest information.
D-Link
Oct. 2015
Table 316: RRM Channel Load Configuration (Cont.)
Description
Status of the current measurement, which is one of the following:
• Not Started
• In Progress
• Success—Last measurement completed.
• Timed Out—Last measurement timed out.
• Aborted—Administrator aborted the last request.
• Incapable—Client is not capable of taking the requested measurement.
• Refused—Client refused to perform the measurement.
Number of seconds before the measurement request times out.
Enter the MAC address of the client to measure its channel load.
Enter the channel the client should use to measure the load.
Enter the number of time units (TUs) for which to measure the channel. Each TU is
equal to 1024 μs.
Monitoring Status and Statistics
Unified Wired and Wireless Access System
Page 529