Figure 182: Adding An Ip Helper Entry To An Interface; Table 165: Ip Helper Interface Configuration Add Fields - D-Link DWL-8600AP User Manual

D-Link UWS User Manual
To add a relay entry, click Add. The page refreshes and provides the configurable fields to add a UDP
destination port and server IP address.
Field
Source IP Interface
UDP Destination Port
Discard
Server Address
• Click Submit to send the updated configuration to the switch. These changes will not be retained across a
power cycle unless a Save configuration is performed.
• Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value
of the switch.
D-Link
Oct. 2015

Figure 182: Adding an IP Helper Entry to an Interface

Table 165: IP Helper Interface Configuration Add Fields

Description
The the interface from the pulldown menu to for which user wants to
configure the relay entry.
The the Destination UDP port Name from the pull down menu or configure
the port number to configure the Relay Entry on selected interface.
If set to True, packets arriving on the given interface with the given
destination UDP port are discarded rather than relayed. Discard entries are
used to override global IP helper address entries which otherwise might
apply to a packet.
The IPv4 address of the server to which packets are relayed for the specific
UDP Destination Port.
Configuring the IP Helper Features
Unified Wired and Wireless Access System
Page 286