D-Link UWS User Manual
GARP Switch Configuration
Use the GARP Switch Configuration page to configure GARP settings for the system.
To access the GARP Switch Configuration page, click LAN > L2 Features> GARP > Switch Configuration in the
navigation tree.
Field
Switch GVRP Mode
Switch GMRP Mode
• If you make any changes to the page, click Submit to apply the changes to the system.
D-Link
Oct. 2015
Figure 115: GARP Switch Configuration
Table 99: GARP Switch Configuration Fields
Description
Shows the GARP VLAN Registration Protocol administrative mode for the
switch. The switch GVRP mode must be enabled for the ports to function in
GARP protocols, even if GVRP is enabled on a port.
Shows the GARP Multicast Registration Protocol administrative mode for the
switch. The switch GMRP mode must be enabled for the ports to function in
GARP protocols, even if GMRP is enabled on a port.
Configuring GARP
Unified Wired and Wireless Access System
Page 206