Omron e5ck User Manual page 91

Ramp rate 0
Ramp rate 7
• Sets the degree of change per time unit of ramp rate in the step time ramp step.
Function
0: The ramp step is skipped.
Setting
F Related description
4.3 Ramp Rise Rate Setup Program (page 4 9)
F Related parameters
All parameters in the program mode
See
Step time/Rate of rise programming" Time unit of ramp rate" (expansion mode)
Step 0 time (Step time)
Soak time 0 (Rate of rise programming)
Step 7 time (Step time)
Soak time 7 (Rate of rise programming)
Step 8 time (Step time)
Step 15 time (Step time)
• Sets the time of steps 0 to 15 when the step time is set.
• Sets soak steps 0 to 7 when the rate of rise programming is set.
Function
Setting
F Related description
3.5 Setting Patterns (page 3 14)
4.3 Ramp Rise Rate Setup Program (page 4 9)
F Related parameters
See
All parameters in the program mode
Step time/Rate of rise programming" Program time unit" Time unit of ramp
rate" (expansion mode)
to
Setting Range
0 to 9999 EU/Time unit of ramp rate
to
to
Setting Range
0.00 to 99.59
Conditions of Use
Within the number of steps only in the rate
of rise programing.
Unit
Conditions of Use
Unit
Program time unit
Program Mode
Default
0
Within the number of steps.
Default
0.00
5–13