Omron e5ck User Manual page 123

Event input assignment 1
• The following functions are assigned as event inputs:
Run/reset," Auto/manual," Hold/hold cancel," Advance," Pattern select 0 to 1"
• Weighting of the remote/local function is as follows:
Function
Pattern select 0 = 2
• When event input is used as advance input, program steps are advanced at the rising
edge (OFF!ON) of the event input signal. When event input is used as run/reset in
put, the program is reset at the rising edge (OFF!ON) of the event input signal, and
the program runs at the falling edge (ON!OFF). Other signals are accepted as dur
ing regular operation.
Settings
Setting
*1 Enabled when the number of patterns" parameter is set to 2" or more
*2 Enabled when the number of patterns" parameter is set to 3" or more
• Default is 
F Related description
4.7 How to Use Event input (page 4 23)
F Related parameters
See
Remote/local" (level 2 mode)
Hold" Advance" (level 0 mode)
Pattern No." (level 0/program mode)
F Option units
E53 CKB
Model
0
, Pattern select 1 = 2
Function
Event input disabled
OFF³ON : Reset /ON³OFF : Run
ON : Manual /OFF : Auto
ON : Hold /OFF : Hold cancel
OFF³ON Execution
OFF: pattern 0 / ON: pattern 1 (*1)
OFF: pattern 0 / ON: pattern 2 (*2)
".
Option Mode
Conditions of Use
The event input function must be in use.
2
5–45