Auxiliary output 1 assignment
• Assigns output functions to auxiliary output 1.
The following 10 output functions can be assigned as outputs:
Alarms 1 to 3, LBA, Time signals 1 to 2, Program end, Stage output, Error 1 (input
Function
error), Error 2 (A/D converter error)
• When the output function assigned to auxiliary output 1 is ON, the SUB1 LED lights.
Symbol
Function
Setting
Symbol
Function
These parameters are factory set to [
F Related description
3.3 Setting Output Specifications (page 3 7)
F Related parameters
See
• Alarm related parameters
Time signal 1 enabled step" Time signal 2 enabled step" Time signal 1 to 2 ON
time" Time signal 1 to 2 OFF time" (program mode)
LBA detection time" (level 2 mode)
to
Alarms 1 to 3
Program end
Stage output
Setup Mode
to
LBA
Time signals 1 to 2
Error 1
Error 2
].
5–33