Omron e5ck User Manual page 124

CHAPTER 5 PARAMETERS
Option Mode
Communication stop bit
Communication data length
Communication parity
• These parameters are enabled when the power is turned ON again.
• These parameters set the communications conditions. Make sure that the stop bit,
data length, parity and baud rate of the host computer and the E5CK T controller are
Function
matching.
• When connecting two or more E5CK T controllers to the host computer, set unit Nos.
that will not conflict with the unit Nos. of other controllers.
• Communication stop bit" parameter
Setting
• Communication data length" parameter
• Communication parity" parameter
"
• Communication baud rate" parameter
1.2, 2.4, 4.8, 9.6, 19.2
• Communication unit No." parameter
F Related description
Chapter 6 Using the Communications Functions
F Related parameter
See
Remote/Local" (level 2 mode)
F Option units
E53 CK01/03
Model
5–46
Setting Range
1, 2
Setting Range
7, 8
Setting
": None/ " ":Even/"
Setting Range
Setting Range
0 to 99
Conditions of Use
The communications function must be in
use.
Unit Default
Bits 2
Unit Default
Bits 7
Default
":Odd
Unit Default
kbps 9.6
Unit Default
None 0
Communication baud rate
Communication unit No.