_C/_F selection
• This parameter can be used when thermocouple or platinum resistance thermometer
is selected as the input type.
• Set the temperature input unit to either of _C" or _F".
Function
": _C / "
"
Setting
F Related description
3.2 Setting Input Specifications (page 3 4)
F Related parameter
See
Input type" (setup mode)
Parameter initialize
• Returns parameter settings to their factory settings. However, note that the follow
ing parameters are not affected by execution of this parameter:
Input type", Scaling upper limit", Scaling lower limit", Decimal point" and
Function
_C/_F selection"
• When this parameter is selected, [
ters, press the
Example
of use
Setting Range
": _F
key to specify [
Conditions of Use
The input type must be set to temperature
input (thermocouple or platinum resis-
tance thermometer).
Default
] (no") is first displayed. To initialize parame
] (yes").
Setup Mode
5–31