Omron e5ck User Manual page 86

CHAPTER 5 PARAMETERS
Level 0 Mode
Hold
• This parameter can only be used for monitoring when the controller is reset.
• Pauses (holds) or cancels program operation.
• When the event input to which hold/hold cancel" is assigned is ON, [
Function
displayed, and when OFF [
• In addition to the setting of this parameter, hold is canceled by the following condi
tions:
OFF
Setting
F Related description
4.4 Program Operation (page 4 13)
4.8 How to Use Event Input (page 4 17)
F Related parameters
See
Event input assignment 1" (option mode)
Advance
• This parameter can only be used for monitoring when the controller is reset.
• Forcibly advances program operation by one step.
• When the event input to which hold/hold cancel" is assigned is ON, [
Function
is displayed.
• Selecting this parameter, it is set to [
• When [
• After program exection is completed, the setting automatically returns to [
Example
of use
• Hold is also continued after the program step is advanced when the program is
executed in a hold state.
F Related description
4.4 Program Operation (page 4 13)
4.7 How to Use Event Input (page 4 17)
F Related parameters
See
Event input assignment 1" (option mode)
5–8
Setting Range
: Hold cancel / ON: Hold
] (ON) is selected, program operation is advanced by one step.
] (hold cancel) is displayed.
Default
] (OFF).
] (hold) is
] (advance)
].