Omron e5ck User Manual page 45

JAlarm value
:
: : 0 to 3
About the Alarm
Value Decimal
Point
• Alarm values can be set only for alarms that have been assigned as out
put.
• When a deviation alarm is assigned as output, the alarm value is set with
respect to SP . The following example shows the relationship between the
SP and alarm value when the alarm type is set to upper limit."
SP
Step 0
Step 1 SP
Step 0 SP
Alarm type: upper-limit alarm
The decimal point of the alarm value conforms to the setting of the decimal point"
parameter . In this example, the decimal point" parameter is set to 1". (During
temperature input, the decimal point of the alarm value conforms to the set sensor.)
3.5 Setting Patterns
Step 1 Step 2
Alarm value
Time
3–15