Omron e5ck User Manual page 33

F Setup examples
AC100-240V
(AC/DC24V )
This description assumes that the controller is operated under the follow
ing conditions.
• A K thermocouple is used as the input.
• Control output (heat), alarm 1 and alarm 2 functions are assigned to
control output 1," control output 2" and auxiliary output 1, respec
tively. Of these, only control output 1 and auxiliary output 1 are used.
• The relay output unit is mounted at control output 1.
• The upper limit alarm is set as alarm 2. The alarm is output when the
temperature exceeds 10_C with respect to the PV .
• The program is made up of one pattern comprising four steps.
• The following figures show terminal wiring and the program used in the
setting examples.
Humidifier
OUT1
5 10
11 12
4 9
3 8
2 7
13 14
1 6
E5CK–T
SP
Step 1
100
50
0.20
3.1 Convention Used in this Chapter
Temperature sensor
K thermocouple
Control target
OUT2
Step 2
Pattern 0
0.40
Alarm 1
(deviation upper-and
lower-limit)
Step 3
0.20
Time: hr, min
3–3