Omron e5ck User Manual page 117

Number of patterns
• Sets the number of patterns that can be used in a program.
Function
Setting
F Related parameters
Run all enable" (expansion mode)
Event input assignment 1" (option mode)
See
Program time unit
• Specifies the time unit of the following parameters:
Pattern elapsing time monitor", Step 0 to 15 time"/Soak time 0 to 7", Time signal
1 ON time" Time signal 2 ON time" Time signal 1 OFF time" Time signal 2 OFF
Function
time"
"
Setting
F Related parameters
Pattern elapsing time monitor" (level 1 mode)
Steps 0 to 15 time/Soak time 0 to 7" Time signal 1 ON time" Time signal 2 ON
See
time" Time signal 1 OFF time" Time signal 2 OFF time" (program mode)
Setting Range
1 to 4
Setting Range
" :Hour, minute/ " " :Minute, second
Expansion Mode
Default
1
Default
5–39