Omron e5ck User Manual page 110

CHAPTER 5 PARAMETERS
Setup Mode
Control output 1
assignment
Control output 2
assignment
• Assigns the output functions to either of control output 1 or 2.
• The following 10 output functions can be assigned as outputs:
Control output (heat), Control output (cool), Alarms 1 to 3, LBA, Time signals 1 and
Function
2, Program end and Stage output
• When the output function assigned to control output 1 or control output 2 is ON, the
OUT1" or OUT2" LED lights.
Symbol
Function
Setting
Symbol
Function
Default :
Control output 1"= [
F Related description
3.3 Setting Output Specifications (page 3 7)
F Related parameters
See
• Alarm related parameters
• Heating and cooling related parameter
Time signal 1 enabled step" Time signal 2 enabled step" Time signal 1 to 2 ON
time" Time signal 1 to 2 OFF time" (program mode)
LBA detection time" (level 2 mode)
5–32
Control output (heat)
to
Program end
Time signals 1 to 2
], Control output 2"= [
Control output (cool)
Stage output
].
to
Alarms 1 to 3 LBA