Manage The Snmp Settings - NETGEAR WAC510 User Manual

5. Select one of the following Secure Shell (SSH) radio buttons:
• Enable. SSH is enabled. This is the default setting.
• Disable. SSH is disabled.
6. Click the Apply button.
Your settings are saved.

Manage the SNMP Settings

By default, you can access the access point over a Simple Network Management Protocol (SNMP) connection,
which allows SNMP network management software such as HP OpenView to manage the access point by
using the SNMPv1 or v2 protocol.
To manage the SNMP settings:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The default password is password. The user name and password
are case-sensitive.
The Dashboard page displays.
4. Select Management > Maintenance > Remote Management.
5. Select one of the following SNMP radio buttons:
AC WiFi Business Access Point WAC510
Manage and Maintain the Access Point
97