NETGEAR WAC510 User Manual page 105

The Connected Clients pane (shown on the right side in the previous figure) shows the top clients table
(clients with the highest level of traffic).
4. Click the menu bar under Connected Clients and select All WiFi Clients (the default menu selection),
the clients for a specific WiFi network (SSID), or LAN Devices.
For each category, the menu displays the total number of connected clients and the device names of
the connected clients.
5. To view information about a connected client, click its device name.
The page displays the MAC address, device name, IP address, and SSID (WiFi clients only) for the
client. You can also view more information, including very detailed information (see
6. To view trends about clients, scroll down to the Hours Trend pane.
The Hours Trend pane shows a graph with either the number of clients or the traffic in MB over a period
that you can select. By default, the client information is selected (that is, the Client button is selected)
and the graph shows the total number of clients for both radios and the number of clients for each radio
(2.4 GHz and 5 GHz).
7. To view more information, point to a node on one of the lines on the graph.
8. To change the period over which information is filtered and displayed, select the number of recent hours
from the menu next to the Traffic button.
9. To view more information about currently connected WiFi and wired clients, select Management >
Monitoring > Connected Clients.
By default, the Wireless Clients tab is selected and the connected WiFi clients display. (For information
about wired clients, see
For each radio and each WiFi client, the page displays the SSID, MAC address, IP address, host name,
operating system (OS), and WiFi mode.
AC WiFi Business Access Point WAC510
Step 11).
Monitor the Access Point and the Network
105
Step 9).