NETGEAR WAC510 User Manual page 98

• Enable. SNMP is enabled. This is the default setting.
• Disable. SNMP is disabled.
6. If SNMP is enabled and you want to use it, specify the following settings:
• Read-Only Community Name. The community string that allows the SNMP manager to read the
access point's MIB objects. The default is public.
• Read-Write Community Name. The community string that allows the SNMP manager to read and
write the access point's MIB objects. The default is private.
• Trap Community Name. The community name that is associated with the IP address at which
traps must be received. The default is trap.
• IP address (to receive traps). The IP address of the SNMP manager that must receive the traps.
• Trap Port. The port number at which the SNMP manager must receive traps. The default is 162.
7. Click the Apply button.
Your settings are saved.
AC WiFi Business Access Point WAC510
Manage and Maintain the Access Point
98