NETGEAR WAC510 User Manual page 125

Table 3. WAC510 access point specifications
Feature
Supported WiFi radio
frequencies and WiFi modes
Maximum theoretical
throughput
Maximum number of
supported clients
WiFi standards
802.11 security
Operating frequency range
Factory Default Settings and Technical Specifications
AC WiFi Business Access Point WAC510
Description
2.4 GHz band: 802.11ng, 801.11bg, and 802.11b
5 GHz band: 802.11ac, 802.11na, and 802.11a
Supports 2.4 GHz and 5 GHz concurrent operation
About 1.2 Mbps simultaneous throughput (300 Mbps on the 2.4 GHz band and 867
Mbps on the 5 GHz band)
Note: Throughput can vary. Network conditions and environmental factors, including
volume of network traffic, building materials and construction, and network overhead,
affect the data throughput rate.
The access point can support a maximum of 128 WiFi clients.
Maximum number of 2.4 GHz WiFi clients: 64
Maximum number of 5 GHz WiFi clients: 64
Note: In a WiFi network, the number of clients is limited by the amount of WiFi traffic
that is generated by each client.
IEEE 802.11ac Wave 2 standard
WiFi Multimedia Prioritization (WMM)
Wireless distribution system (WDS)
Power over Ethernet (PoE) IEEE 802.3af
Power over Ethernet (PoE) IEEE 802.3at
WPA2-PSK and WPA and WPA2 (mixed mode)
2.4 GHz band:
• US and Canada: 2.412–2.462 GHz
• Europe: 2.412–2.472 GHz
• Australia: 2.412–2.472 GHz
• Japan: 2.412–2.472 GHz
5 GHz band:
• US and Canada: 5.18–5.24 + 5.745–5.825 GHz
• Europe: 5.18–5.24 GHz and DFS (5.25–5.35 + 5.50–5.70)
• Australia: 5.18–5.24 + 5.745–5.825 GHz
• Japan: 5.18–5.24 GHz
125