Change The Country Or Region Of Operation - NETGEAR WAC510 User Manual

To change the system name:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The default password is password. The user name and password
are case-sensitive.
The Dashboard page displays.
4. Select Management > Configuration > System > Basic.
The General page displays the basic system settings.
5. Enter a new name in the System Name field.
Using the following guidelines:
• The name must contain alphanumeric characters, can contain hyphens, and cannot be longer than
15 characters.
• The name cannot start or end with a hyphen.
• The name must contain at least one alphabetical character.
6. Click the Apply button.
Your settings are saved.

Change the Country or Region of Operation

You can change the country or region in which the access point operates. Note the following:
• For products sold in the Unites States, the default country is preset and cannot be changed.
• For products sold outside the United States, you must select a country or region.
• It might not be legal to operate the access point in a country or region other than those listed in the
menu.
• If your country or region is not listed in the menu, you must check with your local government agency
or check the NETGEAR website for information about which channels you can use.
To change the country or region of operation:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
AC WiFi Business Access Point WAC510
Manage and Maintain the Access Point
85