Technical Specifications - NETGEAR WAC510 User Manual

Table 2. WAC510 access point factory default settings (Continued)
Feature
Advanced WiFi settings for all WiFi networks (SSIDs or VAPs)
Maximum WiFi Clients
802.11n 256 QAM (2.4 GHz
radio only)
Beacon interval
AMPDU
RTS threshold
Fragmentation length
Frame burst
Preamble type (2.4 GHz radio
only)
DTIM interval
Broadcast/multicast rate
limiting
Fixed multicast rate
Load balancing between
radios
Wireless distribution system
(WDS)
General security
URL filtering
MAC ACLs

Technical Specifications

The following table shows the technical specifications of the access point.
AC WiFi Business Access Point WAC510
Default Setting
100 per radio
Disabled
100 millisec.
Enabled
2346
2346
Disabled
Long
1 sec.
Enabled but without limit
54 Mbps
Disabled
Disabled
None
None
Factory Default Settings and Technical Specifications
124