Enable Or Disable Telnet; Enable Or Disable Secure Shell - NETGEAR WAC510 User Manual

Enable or Disable Telnet

By default, you cannot access the access point over a Telnet connection. You first must enable the access
point for a Telnet connection.
To enable or disable Telnet:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The default password is password. The user name and password
are case-sensitive.
The Dashboard page displays.
4. Select Management > Maintenance > Remote Management.
The Remote Management page displays.
5. Select one of the following Telnet radio buttons:
• Enable. Telnet is enabled.
• Disable. Telnet is disabled. This is the default setting.
6. Click the Apply button.
Your settings are saved.

Enable or Disable Secure Shell

By default, you can access the access point over a Secure Shell (SSH) connection.
To enable or disable SSH:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The default password is password. The user name and password
are case-sensitive.
The Dashboard page displays.
4. Select Management > Maintenance > Remote Management.
The Remote Management page displays.
AC WiFi Business Access Point WAC510
Manage and Maintain the Access Point
96