Remove A Wifi Network - NETGEAR WAC510 User Manual

To disable or enable a WiFi network:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The default password is password. The user name and password
are case-sensitive.
The Dashboard page displays.
4. Select Management > Configuration > Wireless > Basic.
The page that displays lets you select an SSID.
5. Click the > button to the left the SSID.
The settings for the selected SSID display.
6. Under VAP, select one of the following radio buttons:
• Disable. The WiFi network is disabled.
• Enable. The WiFi network is enabled.
7. Click the Apply button.
Your settings are saved.

Remove a WiFi Network

You can remove a custom WiFi network (SSID or VAP) that you no longer need. You cannot remove the
default WiFi network.
To remove a WiFi network:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The default password is password. The user name and password
are case-sensitive.
The Dashboard page displays.
4. Select Management > Configuration > Wireless > Basic.
The page that displays lets you select an SSID.
5. Click the trash can icon to the right of the SSID.
AC WiFi Business Access Point WAC510
Manage the Basic WiFi and Radio Features
31