NETGEAR WAC510 User Manual page 79

5. Click the + button to the left of Add Server.
By default, the Enable radio button is selected.
6. Specify the settings that are described in the following table.
Setting
VLAN ID
Starting Address
Ending Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Primary WNS
Secondary WNS
Lease
7. Click the Apply button.
AC WiFi Business Access Point WAC510
Description
From the VLAN ID menu, select the VLAN ID for the WiFi network (SSID) to which you
assign the DHCP server. For information about assigning a VLAN ID to a WiFi network,
see Change the VLAN ID for a WiFi Network
Enter the starting IP address of the DHCP IP address range.
Enter the ending IP address of the DHCP IP address range.
Enter the subnet mask that is used for all IP addresses in the DHCP IP address range.
The IP address of the gateway that is used by your Internet modem.
The IP address of the primary Domain Name System (DNS) server that is used by your
Internet modem.
The IP address of the secondary DNS server that is used by your Internet modem. Or
leave this field blank.
The IP address of the primary Windows Internet Name Service (WINS) server that is
used by your Internet modem, if any.
The IP address of the secondary WINS server that is used by your Internet modem. Or
leave this field blank.
From the menus, specify the duration of the IP address lease. By default, the lease
expires after one day (24 hours), after which the WiFi client must renew the lease.
Manage the Local Area Network and IP Settings
on page 35.
79