Manage The Basic Settings For The Radios - NETGEAR WAC510 User Manual

•

Manage the Basic Settings for the Radios

• Turn a Radio On or Off
• Change the WiFi Mode for a Radio
• Change the MCS Index and Data Rate for a Radio
• Change the Channel Width for a Radio
• Change the Output Power for a Radio
• Change the Guard Interval for a Radio
• Change the Channel for a Radio
• Set Up a WiFi On/Off Schedule for the Radios
• Manage Quality of Service for a WiFi Radio
For information about the advanced radio features, see
Manage the Basic Settings for the Radios
The basic WiFi settings for the radios apply to all WiFi networks (VAPs or SSIDs). You can specify the radio
settings for the 2.4 GHz and 5 GHz radios individually. For information about the advanced radio settings,
see Manage the Advanced WiFi Settings for the Radios
To manage the basic WiFi settings for the radios:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The default password is password. The user name and password
are case-sensitive.
The Dashboard page displays.
AC WiFi Business Access Point WAC510
on page 40
on page 43
on page 44
on page 45
on page 46
on page 47
on page 47
on page 48
on page 49
Manage the Basic WiFi and Radio Features
40
on page 45
Manage the Advanced Radio Features
on page 52.
on page 52.