Manage The Syslog Settings - NETGEAR WAC510 User Manual

By default, the Hostname radio button is selected.
• Select the IP address radio button and enter the IP address of the NTP server.
7. Click the Apply button.
Your settings are saved. When the access point connects over the Internet to the new NTP server, the
date and time that display on the page are adjusted according to your settings.
For information about setting the time zone, see

Manage the Syslog Settings

If a syslog server is present on your network, you can configure the access point to send its system logs to
the syslog server.
To manage the syslog settings and enable the syslog function:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The default password is password. The user name and password
are case-sensitive.
The Dashboard page displays.
4. Select Management > Configuration > System > Advanced > Syslog.
5. Specify the IP address and port number for the syslog server:
• Syslog Server IP Address. Enter the IP address of the syslog server on your network.
• Port Number. Enter the port number at which the syslog can be reached. By default, the port number
is 514.
6. To enable the syslog server function, select the Enable Syslog check box.
7. Click the Apply button.
Your settings are saved.
AC WiFi Business Access Point WAC510
Set the Time Zone
Manage and Maintain the Access Point
87
on page 23.