NETGEAR WAC510 User Manual page 41

4. Select Management > Configuration > Wireless > Basic > Wireless Settings.
5. Configure the settings as described in the following table.
The descriptions in the table apply to both radios, but you can specify the radio settings for the 2.4 GHz
and 5 GHz radios individually.
Setting
Turn Radio On
Wireless Mode
AC WiFi Business Access Point WAC510
Description
By default, the Turn Radio On check box is selected and the radio broadcasts. Turning
off a radio disables WiFi access for the band, which can be helpful during configuration,
network tuning, or troubleshooting.
Select one of the following WiFi modes for the 2.4 GHz radio:
• 11b. 802.11n, 802.11g, and 802.11b WiFi clients can connect to the access point.
However, the speed of 802.11n and 802.11g clients is limited.
• 11bg. 802.11n, 802.11g, and 802.11b WiFi clients can connect to the access point.
However, the speed of 802.11n clients is limited.
• 11ng. 802.11n, 802.11g, and 802.11b WiFi clients can connect to the access point.
This is the default setting.
Select one of the following WiFi modes for the 5 GHz radio:
• 11a. 802.11ac, 802.11na, and 802.11a WiFi clients can connect to the access point.
However, the speed of 802.11ac and 802.11na clients is limited.
• 11na. 802.11ac, 802.11na, and 802.11a WiFi clients can connect to the access
point. However, the speed of 802.11ac clients is limited.
• 11ac. 802.11ac, 802.11na, and 802.11a WiFi clients can connect to the access
point. This is the default setting.
Manage the Basic WiFi and Radio Features
41