NETGEAR WAC510 User Manual page 53

4. Select Management > Configuration > Wireless > Advanced.
5. Configure the settings as described in the following table.
The descriptions in the table apply to both radios. Except for the 802.11n 256 QAM feature and the
preamble type, you can specify the radio settings for the 2.4 GHz and 5 GHz radios individually.
Setting
Max. Wireless Clients
802.11n 256 QAM
Beacon Interval (20-100)
AC WiFi Business Access Point WAC510
Description
Enter the maximum number of WiFi clients that can simultaneously associate with the
radio. The range is from 1 to 100. The default is 64 WiFi clients.
Select the 802.11n 256 QAM check box to enable the 2.4 GHz radio to function over
256-quadrature amplitude modulation (QAM), which might increase throughput for
802.11ac devices.
This feature is always enabled for the 5 GHz radio (you cannot disable it). For the 2.4
GHz radio, this feature is disabled by default, but you can enable it.
Enter an interval between 20 ms and 100 ms for each beacon transmission, which allows
the radio to synchronize the WiFi network. The default is 100 ms.
Manage the Advanced WiFi and Radio Features
53