NETGEAR WAC510 User Manual page 106

10. To view very detailed information about a WiFi client, click the information icon to the left of the client.
The Detailed Client Information page displays and shows the following information:
• MAC Address. The MAC address of the client.
• IP Address. The IP address associated with the client.
• OS. The operating system that runs on the client.
• Host Name. The host name of the client.
• BSSID. The BSSID that the client connects to.
• SSID. The SSID of the radio that the client connects to.
• Channel. The channel that the client connects to.
• Channel Width. The channel width of the channel that the client connects to.
• Tx Rate. The rate of traffic transmission of the client.
• Rx Rate. The rate of traffic reception of the client.
• RSSI. The RSSI threshold value of the client.
• Tx Bytes. The number of bytes that the client transmitted.
• Rx Bytes. The number of bytes that the client received.
• State. The QoS state of the connection.
• Type. The type of WiFi security that is used for the connection.
• Device Type. The type of device that the client is.
• Mode. The WiFi mode of the connection.
• Status. The security status of the connection.
• Idle Time. The time that the client remained idle.
• Assoc Time Stamp. The time that is associated with the information on the Detailed Client
Information page.
11. To view information about the wired clients, click the Wired Clients tab.
For each wired client, the page displays the MAC address, host name, IP address, and operating system
(OS).
12. To display the most recent information, click the Refresh button.
AC WiFi Business Access Point WAC510
Monitor the Access Point and the Network
106