NETGEAR WAC510 User Manual page 123

Table 2. WAC510 access point factory default settings (Continued)
Feature
WLAN settings for an individual WiFi network (SSID or VAP)
WiFi communication
Client separation
Broadcast SSID
802.11K (RRM)
Band steering
RSSI threshold
VLAN ID (for WiFi clients)
Network Authentication
Data encryption
Passphrase
MAC ACL
Bandwidth limitation
Captive portal
Basic WiFi settings for all WiFi networks (SSIDs or VAPs)
Radios
WiFi mode
MCS index / data rate
Channel width
Output power
Guard interval
Channel
WiFi schedule
Wi-Fi Multimedia (WMM)
WMM powersave
Factory Default Settings and Technical Specifications
AC WiFi Business Access Point WAC510
Default Setting
Both the 2.4 GHz radio and the 5 GHz radio are enabled.
Disabled
Enabled
Disabled
Disabled
–70
1
WPA2-PSK
AES
sharedsecret
None assigned
None
None
Both the 2.4 GHz radio and the 5 GHz radio are enabled.
11ng for the 2.4 GHz radio
11ac for the 5 GHz radio
Best
Dynamic 20/40 MHz for the 2.4 GHz radio
Dynamic 20/40/80 MHz for the 5 GHz radio
Maximum (100%)
Auto
Auto
None
Enabled
Enabled
123