Configuration - NETGEAR WAC510 User Manual

Install the Access Point in Your Network
and Access It for Initial Configuration
This chapter describes how you can install and access the access point in your network.
The chapter contains the following sections:
• Position Your Access Point
• Set Up and Connect the Access Point to Your Network or Internet Modem
• Connect to the Access Point for Initial Configuration
• Log In to the Access Point After Initial Setup to View or Change Settings
• Change the Admin User Account Password
• Set the Time Zone
on page 11
on page 23
on page 15
on page 22
10
on page 12
on page 22
2