Remove A User Account - NETGEAR WAC510 User Manual

A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The default password is password. The user name and password
are case-sensitive.
The Dashboard page displays.
4. Select Management > Configuration > System > Advanced > User Accounts.
The existing user accounts display.
5. To the right of the user account, change the existing settings as needed:
• User Name. Enter another user name.
• Password. Enter another password between 4 and 12 characters in length.
Do not include quotation marks in the password.
• Privilege. From the menu, select Read-Write or Read-Only.
6. Click the Apply button.
Your settings are saved.

Remove a User Account

You can remove a user account that you no longer need.You cannot remove the default admin user account.
To remove a user account:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The default password is password. The user name and password
are case-sensitive.
The Dashboard page displays.
4. Select Management > Configuration > System > Advanced > User Accounts.
The existing user accounts display.
5. Click the X to the right of the user account.
The user account is removed.
AC WiFi Business Access Point WAC510
Manage Access and Security
69