Set The Time Zone - NETGEAR WAC510 User Manual

The ideal password contains no dictionary words from any language and contains uppercase and lowercase
letters, numbers, and symbols. However, do not include quotation marks in the password. The password
must be between 4 and 12 characters in length.
Note This admin password is the password that you use to log in to the access point's web
management interface. It is not the password that you use for WiFi access.
To change the password for the user name admin:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The default password is password. The user name and password
are case-sensitive.
The Dashboard page displays.
4. Select Management > Configuration > System > Advanced > User Accounts.
The page that displays lets you change the user accounts.
5. Next to admin, in the Password field, enter the new password.
6. In the Confirm Password field, enter the same new password.
Note You cannot change the user name. The name must remain admin.
7. Click the Apply button.
Your settings are saved. The next time that you log in to the access point, you must use the new
password. If you forget the new password, you must reset the access point to factory default settings.
Doing so restores the password to the default password.

Set the Time Zone

The access point might detect the time zone automatically or you might need to adjust the time zone and
daylight saving time settings. When the access point synchronizes its clock with a Network Time Protocol
(NTP) server, the page shows the date and time. If the page does not show the correct date and time, you
might need to set the time zone and adjust the daylight saving time setting.
To set the time zone and adjust the daylight saving time setting:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
Install the Access Point in Your Network and Access It for Initial Configuration
AC WiFi Business Access Point WAC510
23