NETGEAR WAC510 User Manual page 70

Manage the Local Area Network and IP
Settings
This chapter describes how you can manage the local area network (LAN) and IP settings of the access point.
The chapter includes the following sections:
• Disable the DHCP Client and Specify a Fixed IP Address
• Enable the DHCP Client
• Set the 802.1Q VLAN and Management VLAN
• Enable or Disable Spanning Tree Protocol
• Enable or Disable Network Integrity Check
• Enable or Disable Ethernet LLDP
• Enable or Disable UPnP
on page 72
on page 74
on page 75
on page 75
on page 76
on page 77
on page 71
70
6