NETGEAR WAC510 User Manual page 103

4. Look at the Radio Information pane at the top, right corner of the Dashboard (if the page width on your
device is sufficient; otherwise, it might be elsewhere). The following settings are displayed:
• Radio status (If the 2.4 GHz or 5 GHz icon is displayed as gray, the radio is turned off.)
• Mode
• Channel width
• Number of clients
• WiFi traffic volume
5. To view information for the 5 GHz radio, click the 5 GHz tab.
By default, information for the 2.4 GHz tab is shown.
6. To view more detailed information, including the MAC addresses of the WiFi radios, select Management
> Monitoring > System.
The page shows three sections:
• System Information section. The following settings are displayed:
- System Name. The access point NetBIOS name.
- System Mode. The access point system mode (AP or Router).
- Ethernet MAC Address. The MAC address of the Ethernet port of the access point.
- Wireless MAC Address for 2.4 GHz. The MAC address of 2.4 GHz WiFi interface (radio) of
the access point.
- Wireless MAC Address for 5 GHz. The MAC address of 5 GHz WiFi interface (radio) of the
access point.
- Ethernet LLDP. The status of Ethernet LLDP feature (Enabled or Disabled).
- Country / Region. The country or region in which the access point operates or for which the
access point is licensed.
AC WiFi Business Access Point WAC510
Monitor the Access Point and the Network
103