Remove A Wifi Network - NETGEAR WAX610 User Manual

Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual
5. Click the > button to the left of the SSID.
The settings for the selected SSID display.
6. Under Schedule, select one of the following radio buttons:
• Always ON. The WiFi network is enabled.
• Always OFF. The WiFi network is disabled.
• Custom. The WiFi network is enabled or disabled according to a schedule that
you must set up.
An icon displays to the right of the radio button.
7. If you selected Custom in the previous step, do the following:
a. Click the icon next to the radio button.
A pop-up window opens.
b. Either select a predefined time from the Preset menu or select custom time
blocks by clicking the time blocks.
A blue color for a time block indicates that the WiFi network will be enabled (on).
A gray color for a time block indicates that the WiFi network will be disabled (off).
c. Click the Done button.
The pop-up window closes.
8. Click the Apply button.
Your settings are saved.

Remove a WiFi network

You can remove a custom WiFi network (SSID or VAP) that you no longer need. You
cannot remove the default WiFi network.
To remove a WiFi network:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 37.
Manage the Basic WiFi Features 60 User Manual