Set The Time Zone And Adjust The Daylight Saving Time - NETGEAR WAC104 User Manual

The local device password is the one that you specified. The local device password
is case-sensitive.
The Home page displays.
4. In the upper right corner, select a language from the menu.
5. When prompted, click the OK button to confirm this change.
The page refreshes with the language that you selected.
Set the time zone and adjust the daylight
saving time
The AP might detect the time zone automatically or you might need to adjust the time
zone and daylight saving time settings. When the AP synchronizes its clock with a Network
Time Protocol (NTP) server, the page shows the date and time. If the page does not
show the correct date and time, you might need to set the time zone and adjust the
daylight saving time setting.
To set the time zone and adjust the daylight saving time setting:
1. Connect your computer or mobile device to the AP in one of the following ways:
• Connect directly to the AP's WiFi network or LAN.
• Connect to the same network that the AP is connected to.
2. Launch a web browser and enter http://www.aplogin.net (or aplogin.net) in the
address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use aplogin.net on page 24.
A login window displays.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The Home page displays.
4. Select Time.
The Time Zone page displays.
5. From the menu, select the time zone for the area in which the AP operates.
Install and Access the AP in Your
Network
802.11ac Wireless Access Point Model WAC104
28 User Manual