Daewoo MATIZ Service Manual page 84

1E – 28 ENGINE ELECTRICAL
5. Inspect the brush wear.
D12E736A
Assembly Procedure
1. Install in the reverse order of removal.
D102E737
2. Install the bolts / nuts / screws.
D12E738A
6–8 NSm
D102E739
D If the brush wear exceeds the specified valve (a),
replace the brush.
Desciption Standard
Brushes wear 18.5 (0.73)
D Assemble the stator assembly into the rear bracket
and rotor assembly.
a. Brushes.
b. Hole.
Tighten
D Tighten the brush holder / regulator / rectifier
screws to 9–12 NSm (80–106 lb-in) (a).
D Tighten the battery positive terminal nut to 4–7
NSm (35–62 lb-in) (b).
D Tighten the front bearing spot plate screws to 6–8
NSm (53–71 lb-in) (c).
Limit
13.5 (0.53)
DAEWOO M-150 BL2