Daewoo MATIZ Service Manual page 658

DAEWOO M-150 BL2
FIVE-SPEED MANUAL TRANSAXLE 5B – 33
13. Install the counter shaft bearing shim.
D Measure clearance between the transaxle case
surface and the bearing outer race using a
straight ruler and gauge.
D Select shim in order that clearance is within stan-
dard.
Measured value (A)
0.33 − 0.37 (0.0130 – 0.0146)
0.38 − 0.42 (0.0147 – 0.0165)
0.43 − 0.47 (0.0169 – 0.0185)
0.48 − 0.52 (0.0189 – 0.0205)
D13B735A
0.53 − 0.57 (0.0209 – 0.0224)
0.58 − 0.62 (0.0228 – 0.0244)
0.63 − 0.67 (0.0248 – 0.0264)
0.68 − 0.72 (0.0268 – 0.0283)
0.73 − 0.77 (0.0287 – 0.0303)
0.78 − 0.82 (0.0307 – 0.0323)
0.83 − 0.87 (0.0327 – 0.0343)
0.88 − 0.92 (0.0346 – 0.0362)
0.93 − 0.97 (0.0366 – 0.0382)
0.98 – 1.02 (0.0386 – 0.0402)
1.03 – 1.07 (0.0406 – 0.0421)
a. Straight ruler
b. Bearing outer race
c. Case surface
14. Install the side cover plate and the counter shaft fifth
gear.
D Install the side cover plate (1).
Tighten
Tighten the screws to 6–7 N.m (53–62 lb–in).
Important: Use only new screws.
D Install the counter shaft fifth gear (2).
Important: Position the machined boss side toward the
side cover plate.
D13B736A
Unit : mm (in.)
Shim thickness
0.45 (0.0177)
0.50 (0.0197)
0.55 (0.0217)
0.60 (0.0236)
0.65 (0.0256)
0.70 (0.0276)
0.75 (0.0295)
0.80 (0.0315)
0.85 (0.0335)
0.90 (0.0354)
0.95 (0.0374)
1.00 (0.0394)
1.05 (0.0413)
1.10 (0.0433)
1.15 (0.0453)