Digital Clock - Daewoo MATIZ Service Manual

Condition
Digital Clock Inoperative
DAEWOO M-150 BL2
INSTRUMENTATION/DRIVER INFORMATION 9E – 7

DIGITAL CLOCK

Probable Cause
D The open or a short in the power supply
circuit to the fuse Ef2 regardless of the
ignition position.
D The open or a short in the power supply
circuit to the fuse F1 with the ignition
position I.
D The open or a short in the power supply
circuit to the fuse Ef12 with the interior
courtesy lamp ON.
D The circuit between the fuse Ef2 and the
fuse F12 is open or short.
D Fuse Ef2, Ef12, F1 or F12 is blown.
D The circuit between the fuse F12 and the
digital clock connector.
D The circuit between the fuse F1 and the
digital clock connector.
D The circuit between the Ef12 and the
digital clock connector.
D Faulty digital clock.
D Open ground (G201) circuit.
Correction
D Repair or Replace the power
supply circuit wiring harness.
D Repair or Replace the power
supply circuit wiring harness.
D Repair or Replace the power
supply circuit wiring harness.
D Repair or Replace the wiring
harness.
D Replace and fuse.
D Repair or Replace the wiring
harness.
D Repair or Replace the wiring
harness.
D Repair or Replace the wiring
harness.
D Replace the digital clock.
D Repair the open ground
circuit.
D19B304B