1G – 4 ENGINE EXHAUST
REPAIR INSTRUCTIONS
ON–VEHICLE SERVICE
MAA1G010
D102G501
D102G502
EXHAUST PIPE/CATALYTIC
CONVERTER
Caution : Make sure to confirm that the components
is cool. And do work.
Removal Procedure
1. Remove the floor console. Refer to Section 9G, Inte-
rior Trim, if equipped Heated Oxygen Sensor (HO2S).
2. Disconnect HO2S connector.
3. Remove the front exhaust pipe from the exhaust
manifold or pup-up catalytic converter.
D Remove the nuts (1).
D Remove the gasket (2).
4. Check the gasket for damage or crack.
5. Remove the front exhaust pipe from the front muffler
pipe.
D Remove the nuts (1).
DAEWOO M-150 BL2